The application of composite anti-wind insulators can be seen in electrical power transmission and distribution systems where they are used to prevent power outages caused by wind-induced movement of electrical conductors. They are particularly useful in areas with high wind speeds, where traditional insulators may not be effective. The composite material provides excellent mechanical strength, making it resistant to damage from wind and other environmental factors, and helps ensure the reliability and stability of the electrical
35kV, 66kV, 110kV, 220kV windproof composite products are suitable for high-voltage line hard jumper, can effectively prevent jumper wind, wire dancing with the wind, to ensure the insulation distance between the phase and also known as hard jump Line insulators to eliminate the jumper caused by line trip, wire arc burns, broken shares, broken lines and so on. To solve the dangerous wind dancing winds overhead transmission lines safe and stable operation of the important hidden dangers.
Replaceability and pass the user
The product can be replaced with a hard jumper in the line where the suspension insulator, a variety of connection with the tower for the user to choose, but also for the user to customize the special specifications of the tower connected to the fittings. Installation is quick and easy.
Main model dimensions and electromechanical performance
NO.
Product model
Rated voltage (kV)
Rated mechanical bending load
(KN)
Rated mechanical bending load
(KN)
Connection mark
Connection mark
The height of the structure(mm)
Minimum arc distance(mm)
The minimum nominal creepage distance
(mm)
Power frequency withstand voltage 1minkV (RMS) is not less than kV
1
FSP-35/0.4-TQ
35
0.4
100
16
730±15
500
590
1500
95
2
FSP-35/0.4-AQ
35
0.4
100
16
760±15
500
590
1500
95
3
FSP-66/0.8-TQ
66
0.8
100
16
930±15
700
790
2400
185
4
FSP-66/0.8-AQ
66
0.8
100
16
965±15
700
790
2400
185
5
FSP-110/0.8-TQ
110
0.8
100
16
1320±15
1050
1180
3350
230
6
FSP-110/0.8-AQ
110
0.8
100
16
1355±15
1050
1810
3350
230
7
FSP-220/0.8-TQ
220
0.8
100
16
2200±30
1950
1810
6700
395
8
FSP-220/0.8-BQ
220
0.8
100
16
2355±30
1950
1810
6700
395
9
FSP-220/0.8-AQ
220
0.8
100
16
2355±30
1950
1810
6700
395
Windproof partial pressure ring corresponding model table
NO.
Partial wind model
On the grading ring (low end)
Under the pressure ring (high end
Remarks
Model
Remarks
Model
Remarks
1
FSP-35/0.4-TQ
no
no
FJH-110/100F
Ordinary type
Regular order, and ordinary type grading ring
2
FSP-35/0.4-AQ
FJH-220/100F-FN
Anti bird
FJH-110/100F
Ordinary type
Regular order, the tower end of anti bird grading ring
3
FSP-66/0.8-TQ
FJH-220/100F
Ordinary type
FJH-220/100F
Ordinary type
Regular order, and ordinary type grading ring
4
FSP-66/0.8-AQ
FJH-220/100F-FN
Anti bird type
FJH-220/100F
Ordinary type
Regular order, the tower end of anti bird grading ring
Installation method
1, windproof composite insulator transport and installation should be lightly put, should not be thrown, and to avoid with the miscellaneous pieces (wire, iron, tools, etc.) and dust and hard objects collision, friction;
2, lifting, the rope to play in the end of the annex, is strictly prohibited playing in the umbrella skirt or jacket, the rope must touch the umbrella skirt and sheath part of the contact part should be wrapped with a soft cloth;
3, shall not be anti-wind off the insulator as the release (received) line of auxiliary tools, so as not to be subject to impact or bending moment damage insulators;
4, prohibited foot insulator umbrella skirt;
5, the installation of pressure ring, should pay attention to adjust, so that the ring and the insulator vertical axis, for the opening type C are pressure ring, pay attention to the same direction at both ends of the opening to facilitate the discharge, umbrella skirt.
WE ARE HERE TO SUPPORT YOU!
Further information or a personal consultation? Our products and know-how
are there to provide solutions.
